Français :

Uchimata Sailing Service,
Distributeur officiel exclusif de l’hydrogénérateur H240 Save Marine en Charente Maritime !

Save Marine

Save Marine est une marque de la société Save Innovations qui conçoit, développe et fabrique des systèmes de production électrique basse tension à très haut rendement et notamment l’hydrogénérateur H240. C’est à Uchimata que Save Marine confie la distribution officielle de son hydrogénérateur H240 en Charente Maritime.

Un rendement dès 3 noeuds !
L’hydrogénérateur H240 est une turbine fixée sur le tableau arrière d’un voilier de croisière.
Adapté aux voiliers naviguant généralement entre 4 et 8 nœuds, le H240 est capable de débuter une production à partir de 3 nœuds, elle atteint 120W à 5nds et 350W en moyenne à 8nds. Equipé d’un régulateur, l’hydrogénérateur H240 permet de recharger toutes les batteries au plomb, AGM, Gel et Lithium-ion.

Courbe consommation Save Marine

Des essais concluants !
Avant de lancer le produit sur le marché, Save Marine a testé son hydrogénérateur sur plusieurs bateaux pour pouvoir faire certaines mises au point et modifications. C’est pour cela que le H240 est un produit neuf et abouti.
Les essais en vidéos :

Capture Essai H240 Pogo 8.50 Capture Essai H240 Pogo 10.50 Capture Essai H240 sur un voilier

Une utilisation simple !
Avec un poids de seulement 10kg, le H240 est simple à mettre à poste et à enlever. Il existe plusieurs tailles de bras (40, 60, 80 et 100 cm). La vidéo de mise en place du H240 ici :

Capture Mettre à bord le H240

Son utilisation est rendue simple grâce à une application Wi-fi gratuite permettant de superviser et de suivre la production de l’hydrogénérateur de son PC, smartphone ou tablette.

Un produit sûr et performant !
Le carénage autour de l’hélice permet d’accélérer le flux et de diminuer la trainée.
En cas de choc, le Clamcleat automatique se déclenche et libère le bout de maintien, relevant ainsi la turbine.

Capture Système de relevage automatique H240

Sa performance s’explique par la disposition spécifique des aimants et bobines (entraînant très peu d‘inertie et permettant un fonctionnement à basse vitesse) et par le fait qu’aucune pièce de fonctionnement n’aient besoin d’étanchéité. En effet, les composants utilisés sont adaptés au milieu marin (en aluminium et composite haute performance). L’entretien de cet hydrogénérateur est donc minime.

Découvrez le H240 en cliquant ici !

Shop

 

 

 

 

 

 

English :

Uchimata Sailing Service,
Exclusive official distributor of the Save Marine H240 hydrogenerator in Charente Maritime !

Save Marine

Save Marine is a brand of Save Innovations society which design, develop and make low voltage electric production systems and especially the H240 hydrogenerator. Save Marine entrusts Uchimata for the official distribution of the H240 in Charente Maritime.

A yield from 3 knots !
The H240 hydrogenerator is a fixed turbine on the stern on a sailing yacht.
Adapted for sailing yachts generally cruising between 4 and 8 knots, the H240 hydrogenerator is able to begin a production from 3 knots, the production reaches 120W at 5 knots and 350W at 8 knots on average. Equipped by a regulator, the H240 allows to charge Gel and AGM batteries, Lithium-ion batteries and Lead batteries.
Courbe consommation Save Marine

The convincing tests !
Before the launch of the product, Save Marine have tested his hydrogenerator on sailing yachts to make some modifications. It’s why the H240 hydrogenerator is a new and finished product.
The tests on videos :

Capture Essai H240 Pogo 8.50 Capture Essai H240 Pogo 10.50 Capture Essai H240 sur un voilier

A simple use !
Thanks to its weight of 10kg, the H240 is easy to install and remove. Several dimensions of arm exist (40, 60, 80 and 100cm). The installation video is here :

Capture Mettre à bord le H240

Its use is simple thanks to a free Wi-fi application allowing to supervise and to follow the production of the hydrogenerator on your PC, smartphone or tablet.

A sure and efficient product !
The fair around the propeller allows to speed up the flow and to decrease the drag. In case of impact, the automatic Clamcleat goes off and frees the keeping tip, allowing the generator to rise.

Capture Système de relevage automatique H240

Its performance is explained by the disposition of the magnets and coils, entraining a very low inertia and allowing low speed working and by the fact that no components need impermeability. In fact, the components are adapted to the marine environment (in aluminium and high performance composites). So, its maintenance is slim.


To discover the H240, click here !

Shop